All Purpose, Every Occasion Wooden Caddy Tutorial
Hey all you Remodelaholics! It’s Corey from Sawdust 2 Stitches. I have a tutorial that could really be an ace up your sleeve. This is the perfect all-purpose festive gift, no matter what the occasion.
- Father’s Day
- Teacher Gift
- Mother’s Day
- Graduation Gift
- Housewarming
No matter what the use or the occasion, I have got you covered! I actually created this specifically for Teacher Appreciation gifts for my son’s teachers. He had three teachers, so I configured the plans so that it would actually make each unit cheaper if you make them in multiples! So make one for your Dad for Father’s day, and one for your Husband, maybe one for you to keep, or a craft organizer for the kids, or a utensil caddy for the kitchen counter, or an aesthetically pleasing planter, or… you get the idea.
So, let’s dive in…
How to Build a Versatile Wooden Caddy
Tools Suggested:
- Miter Saw
- Nail gun/Compressor
- Sander
- Tape Measure
- Drill with bits ( Size bits will vary)
Cut List:
- 1×6″= (2) cut @ 11″ ( Additional cuts will be required, see instructions below.)
- 1×6″= (1) cut @ 10″
- 1×2″= (4) cut @ 11.5″
Grid Insert
- 1/2 x 4″ = (3) cut @ 3″
- 1/2 x 4″ = (2) cut @5.5″
Supply List:
- Wood Glue
- 1.5″ Nails
- 1×6, 1×2, and .5×4 boards (see below for details)
- Handle (2″ dowel or conduit, or thick rope – varies dependent on look desired)
- Wall-mounted bottle opener
- Stain or paint finish.
- Sandpaper
To make 3: Approx : $7.00 a piece
(It is cheaper when you make 3)
- 1×6″ (8′) x1
- 1×2″ (8′) x2
- .5×4″ (3′) x2
To make 1 : Approx: $14.00
- 1×6″ (6′) x1
- 1×2″ (8′) x1
- .5×4″ (3′)x1
Let’s begin by making the end caps of the caddy.
Cut the 1×6 @ 11″, then make the above additional cuts.
The handle:
At this point you will need to decide what type of handle you would like. You have plenty of options. If you opt for rope, you can drill a hole directly through the board. (Choose a size appropriate diameter.)
If you decide to use a dowel rod, use a coordinating size bit to route out a a circle approximately 1/2″ deep. (You would then cut your handle of choice approximately 11″ long.
If you are using a dowel rod or a conduit rod, you need to place the rod in place before proceeding! I put a dab of glue on each end of the rod to make it a little more stable. Once the handle is in place, then attach the side (with the rod running between them) to the 10″ base.
Using wood glue attach the sides to the base. Then reinforce it with 1.5″ nails.
Attach the side rails to the caddy. Apply a small amount of wood glue to the 1×2″ boards, then reinforce with 1.5″ nails.
(On the models pictured, I did plane down my 1×2’s just a little so that it wouldn’t be as bulky. Not at all necessary, but an option.)
Next step is assembling the grid.
Grid:
BEFORE assembling the grid, place the pieces in the caddy to ensure they will fit! It is a lot easier to alter before it is glued together! Make any adjustments needed. Once everything is double checked, use wood glue on the joints, and assemble. (If you have the tools, routing a groove would of course be sturdier.) However wood glue works great.
Once it is dried, put a small amount of wood glue on the underside of the grid, then place in caddy. Allow it to dry in place.
Now that the caddy is assembled, fill all nail holes with nail filler. Once dry, sand all surfaces to ensure a smooth finish. Then stain/ paint to achieve desired finish.
You have done it! The trickiest part of the project may actually be deciding how you want to use your caddy! Check out a few ideas below.
On the above caddy, I used Minwax Jacobean stain, with a piece of electrical conduit as the handle. ( I used a grinder to cut the conduit.) I added the bottle opener for a last finishing touch. I believe they carry them at Hobby Lobby.
For the caddy featured above, and directly below. I used “Driftwood” stain by Rustoleum, and then slightly distressed the edges with 120 grit sandpaper.
For my last one, I used a basic whitewashing technique. ( I use 1 part water, 2 parts paint, and 1 part faux finish medium.)
So go ahead, and start making your Christmas/Birthday/Graduation/housewarming/Baby Shower gift lists! These are perfect to have a few extra on hand! No matter how many you make, they can always be unique and personalized!
Take Luck,
Corey with Sawdust 2 Stitches
Here is what I have been up to:
Secret Compartment Jewelry Case \\ Awesome Workshop Assembly Table \\ Faux Shiplap Walls
—————————————————-
Looking for more easy gift ideas?
Package up some (free) printable note cards
Make a cement plant pot
Corey is the voice and grunt labor behind Sawdust 2 Stitches, she freely professes, that she has a problem... She CANNOT leave well enough alone.
She can typically be found hunched over a sewing machine and/or covered in sawdust. All in the effort to create a perfect balance of aesthetics and practicality in her home.
get the reader favorite
Cleaning Binder & Custom Cleaning Calendar
This 18-page editable cleaning binder printable pack will help you establish a cleaning schedule based on the custom tasks you actually need for your home. From the spring cleaning checklist to everyday cleaning recipes, this printable set is great for kick-starting a cleaning routine and staying on task with annual and semi-annual tasks, too.
I LOVE IT…that is so adorable!
Corey I love this! Totally going into my “to do” project list!
Great tutorial! You can never have enough totes!
Thank you for the plans, I’ve been looking for a nice one to make. For the end pieces…you show 2″. Are you measuring 2″ from each end? And how far down are you going. Also, for a dowel placement…how far down to the center of the dowel, and what size dowel did you use?
thanks bunches and have a great day!!
Debbie
Absolutely love this. We’ve made a couple, to-date, and plan to make a few more for our own home and gift ideas. I’ll be linking here on my blog, hampersandhiccups.com!
Thanks so much for the great tutorial.
Katelynn, hampersandhiccups.com
Thanks for the love, Katelynn! We’d love to see pictures if you have them. https://www.remodelaholic.com/share-brag-post/